![]() Also, my OS is up-to-date.Īnyone using a similar setup which works?ĭid anyone encounter this before or has any solution? Last time I've done a project on this system it worked on an ESP8266 with CH340 drivers installed (Windows 10 at the time). My other attempts at fixing this problem did not work, at this point I've spent the whole day trying different things with no luck. (Code 10) The specified request is not a valid operation for the target device.". I 've tried to delete USB Root Hubs and USB Composite Device from the Device Manager and rebooting.Īfter that I manually added Legacy Hardware from the Device Manager menu, yet it gave me the following error: "This device cannot start. If you are using a 5.x driver and need support you can download Legacy OS Software. Application Note Software downloads affected are AN144SW.zip, AN205SW.zip and AN223SW.zip. Nothing showed up in Device Manager, not even when plugging in the USB, there's no Other Device popping up. The CP210x Manufacturing DLL and Runtime DLL have been updated and must be used with v 6.0 and later of the CP210x Windows VCP Driver. ![]() I've tried downloading the necessary drivers for Windows 11 ( CP210x Universal Windows Driver from Silicon Labs, pressed 'Install' on the. The package C:Program Files (x86)Windows Kits10MSPackagesRetailARMfreMicrosoft-IoTUAP-CP210x-MakerDriver-Package.cab is contained in more than one feature specified by the OEMInput entries. I've spent all day trying to get a COM port to show up in Arduino (1.8.19), switched between a few microUSB cables and two NodeMCU ESP8266 boards which require CP210X drivers to work. Upon further inspection, the silabser.inf file of the CP210x drivers expects to find a USB device with the 0x10C4 Vendor ID, and three possible Product ID (0圎A63, 0圎A7A or 0圎A7B). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |